GM 160 AS

The GM 160 AS trench cutting machine with auger offers high efficiency and precision

The trench cutter GM 160 AS is a mounted trench cutter for Unimog. It was designed for tractors with a three-point suspension and can be easily attached to the rear of the tractor. With a weight of 2,300 kg, this trencher is comparatively light and can therefore be used with a large number of tractors. Especially when laying drainage pipes, such a machine is very useful and makes work easier for the user.

previous arrow
next arrow

The GM 160 AS trench cutting machine is characterized by high precision

When milling trenches, precision is particularly important. The trenches must be milled as cleanly and accurately as possible in order to be able to accommodate a drainage pipe without difficulty. For this reason, great importance should be attached to a high-quality attachment milling machine for Unimog. This is capable of milling both large trenches and many small trenches in a very short time. Such machines are therefore used both in private house building and on professional construction sites. The trench cutter GM 160 AS has already proven itself in various construction projects and has convinced with its strength and reliability.

The attachment milling machine for Unimog achieves its high precision, among other things, thanks to the carbon chisel chains and mixing chains it uses. The chain widths vary between 150-450 millimetres and are characterised by excellent workmanship and high stability. The milling bar depth is 1,250 or 1,600 millimetres. Another very useful tool is the sole scraper with sole plate, which can be adjusted mechanically or automatically to the respective milling depth.

These tasks are performed by an add-on milling machine for Unimog

An attachment milling machine for Unimog is particularly suitable for laying cables, pipes and drainage pipes. They therefore play a decisive role in house and road construction, but are also used in agriculture. Here, for example, drainage pipes are laid in fields to prevent backwater and the resulting damage. Thanks to the trenches cleanly cut by the GM 160 AS trench cutter, it is easy to place the corresponding pipes in the ground. The excavated material is laid out next to the trenches in such a practical way that subsequent backfilling is no problem at all.

Depending on your requirements, a milling bar depth of 1,250 millimeters or 1,600 millimeters is available. The bars can be used laterally offset, which makes working on obstacles much easier. In addition, different chain widths with a size of 150-450 millimeters can be used. This provides the greatest possible degree of individualization, so that the attachment milling machine for Unimog can be used for numerous projects and for various surfaces. A laser system for manual or automatic depth adjustment makes a further contribution to this flexibility.

Important prerequisites for the use of an attachment milling machine for Unimog

In order to be able to use the trencher GM 160 AS, it is important to have a tractor with a three-point linkage at the rear. Such tractors can work with different types of transmission. The mounted tiller for Unimog can operate with a hydrostatic drive as well as with a super creep speed transmission. In addition, a decision must be made before the selection of the attachment milling machine for Unimog. For example, a power take-off shaft or a hydraulic motor can be selected.

Individual adaptations are possible at any time with a GM 160 AS trench cutter. It should be noted, however, that an increase in accessories is always accompanied by an increase in the weight of the tiller for Unimog. For example, the pipe-laying shaft with a holder for pipes is very popular. These make the laying of drainage pipes in the ground child's play. When selecting a machine, the intended use of the machine should always be kept in mind in order to select and use the appropriate equipment.

Individual equipment on request!


Print Friendly, PDF & Email