This trench cutter for tractors cleanly and precisely digs the trenches that are important for the laying of drainage pipes. Drainage pipe laying plays a decisive role in agriculture, but also in basement construction. Such pipes are used to drain off surface water so that the respective projects are not disturbed. In order for such pipes to perform reliably, it is important to lay them professionally. The use of a GM 140 AF is particularly suitable for this purpose.
Preparing the drainage pipe installation with the GM 140 AF trench cutter for tractors
A trench cutter for tractors is a useful tool when laying pipes or cables. The GM 140 AF is able to mill very precise and clean trenches, ideal for drainage pipes. The machine already prepares the fill during milling. The attachment trench cutter uses two augers to transport the excavated material directly to the side of the trench. As soon as the pipes have been laid, the trench can easily be filled in again.
The GM 140 AF trench cutting machine is highly flexible in this type of work. For example, it is possible to move the milling beams sideways by up to 600 millimeters. The cutter is then still pulled by the tractor, but does not create the trench directly behind it. In this way it is possible to avoid obstacles and embankments during work and achieve the most precise trench possible.
Various features of the GM 140 AF trench cutter for tractors
Different tools and machines are required for different projects. For example, while some projects require a cutter bar depth of 600 millimeters, others require a cutter bar depth of 1,500 millimeters. A trench cutter for tractors covers precisely this spectrum. Depending on the objective, different grave trees are used for the work, and a selection of 70-400 millimetre milling cutters is also available for laying drainage pipes.
The trench cutting machine GM 140 AF is equipped with a mechanical drive with PTO shaft, which operates at 1,000 rpm. The tiller's own weight is 1,300 kg. When making the selection, care must be taken to ensure that the tractor in question is capable of moving this weight. It should also be borne in mind that the weight of the trenchers for tractors can vary depending on which equipment is used.
On request, the tiller can be equipped with a sole scraper with a sole plate that adapts automatically or mechanically to the milling depth. It is also possible to opt for a model with an edge scraper. Some milling machines are equipped with a manual or automatic laser system, while others are equipped with a pipe laying shaft and a holder for pipes. These individual features make it possible to adapt the trenchers for tractors to your personal wishes or requirements.
Find the right trench cutter for tractors GM 140 AF for your own project
There is a wide range of trenchers to choose from. The different models are partly similar, but each has a different focus and special features. While some models, for example, are milling machines for excavators, the GM 140 AF trench milling machine is a trench cutter for tractors. In addition, the individual variants have a different weight or offer a certain number of features and equipment variants.
Grabenmeister will be happy to assist you in selecting and purchasing the milling machines you require. Some models are particularly suitable for laying drainage pipes and perform particularly well in corresponding tasks. With our expertise and many years of experience, we will be happy to advise you. This makes it easy for you to find your way around our wide range of products and gives you the ideal trenchers for tractors.
(Weight and dimensions depend on the respective equipment)
Please note! You can also print this page, save it in PDF format or send it by e-mail.