The trencher GM 160 AF offers high efficiency and precision
The trencher GM 160 AF is a mounted trench cutter for Unimog. It has been designed for tractors with three-point linkage and can be easily attached to the rear of the tractor. With a weight of 2,300 kg, this trencher is comparatively light and can therefore be used with a variety of tractors. This type of machine is particularly useful when laying drainage pipes and makes work easier for the operator.
The GM 160 AF trench cutting machine is characterised by its high accuracy
When milling trenches, precision is particularly important. The trenches must be milled as cleanly and accurately as possible in order to accommodate a drainage pipe without problems. This is why a high-quality mounted tiller is important for Unimog. It is capable of milling both large trenches and many small trenches in a very short time. Such machines are therefore used both in private house building and on professional construction sites. The GM 160 AF trench trencher has already proven its worth in various construction projects and impresses with its strength and reliability.
The attachment milling machine for Unimog achieves its high precision among other things due to the carbon chisel chains and mixing chains used. The chain widths vary between 150-450 millimetres and are characterised by excellent workmanship and high stability. The milling bar depth is 1,250 or 1,600 millimetres. The sole scraper with sole plate, which can be adjusted mechanically or automatically to the respective milling depth, is another very useful tool. If required, a loading conveyor with a depth of 3,000 millimetres can be used for direct loading.
An attachable trench cutter for Unimog performs these tasks
An attachment milling machine for Unimog is particularly suitable for laying cables, pipes and drainage pipes. They therefore play a decisive role in house and road construction, but are also used in agriculture. Here, for example, drainage pipes are laid in fields to prevent backwater and the resulting damage. Thanks to the trenches cut cleanly by the GM 160 AF trencher, the corresponding pipes can be easily laid in the ground. The excavated material is laid with a loading conveyor so that later backfilling is no problem.
Depending on requirements, a milling bar depth of 1,250 millimetres or 1,600 millimetres is available. The rods can be inserted laterally offset, which makes working on obstacles noticeably easier. In addition, different track widths from 150 to 450 millimetres can be used. This provides the greatest possible degree of individualisation, so that the mounted tiller for Unimog can be used for numerous projects and for different surfaces. A laser system for manual or automatic depth adjustment makes a further contribution to this flexibility.
Important prerequisites for the use of a mounted trencher for Unimog
To be able to use the trencher GM 160 AF, it is important to have a tractor with three-point linkage at the rear. Such tractors can work with different types of transmission. The cultivator for the Unimog can work both with a hydrostatic drive and with a super creeper. In addition, a decision must be made before the choice is made as to how the cultivator for the Unimog is to be driven. For example, a power take-off shaft or a hydraulic motor can be selected.
Individual adaptations are possible at any time with the GM 160 AF trencher. It should be noted, however, that a plus in accessories always goes hand in hand with an increase in the weight of the tiller for the Unimog. For example, the pipe-laying shaft is a very popular accessory. This makes the laying of drainage pipes in the ground child's play. When choosing a machine, the intended use of the machine should always be taken into account in order to select and use the appropriate equipment.
Individual equipment on request!
- Prerequisite -carrying equipment: tractor/Unimog hydrostatic or supercreep gear transmission
- Standard equipment: Standard conveyor belt
- Cutter bar depth: - 1250 and 1600 mm (laterally adjustable)
- Chain widths: - 150, 200, 250, 300, 350 400 and 450 mm (100 mm pcs.)
- Carbon chisel chains
- Mixed chains (chisel and blade)
- Sole scraper with sole plate, which adjusts mechanically/automatically to the respective milling depth
- Loading conveyor 3000 mm for direct loading
- Laser system manual or automatic
- Pipe-laying shaft and holder for pipes
- Drive: mech. via PTO (1000 rpm) or optional hydr. motor
- Weight: 2.300 kg
- Length: 4,400 mm
- Width: 1800 mm
- Height: 2,000 mm
(Weight and dimensions depend on the respective equipment)