Excavator tiller GM 140 AFH-500


Trencher GM 140 AFH 500The GM 140 AFH-500 excavator tiller from Lingener Baumaschinen is a powerful machine that has been specially designed for use on excavators. It is ideal for use on larger construction sites where major trenching work needs to be carried out.

The GM 140 AFH-500 is mounted on an excavator and operated by the excavator hydraulics. The machine has a robust cutter head that can mill through hard soil layers to create wider and deeper trenches.

The machine is equipped with a hydraulic system that allows quick and easy adjustment of the milling depth. This allows the machine to be quickly adapted to different soil conditions.

In addition, the GM 140 AFH-500 has a conveyor belt that transports the excavated material directly into a trailer or container. This allows the excavation material to be removed quickly and easily.

The GM 140 AFH-500 can also be equipped with a laying shaft, which enables the machine to lay cables and pipes. The installation shaft feeds the cable or pipe directly into the trench while the machine simultaneously mills the trench. This makes the installation of cables or pipes faster and more efficient.

Overall, the GM 140 AFH-500 excavator tiller from Lingener Baumaschinen is a robust and reliable machine that is ideal for use on larger construction sites. It is easy to use and can be quickly adapted to the requirements of different projects.

Work flexibly with the GM 140 AFH-500 excavator tiller

Flexibility is particularly important for milling work. Because the working conditions on site are not always perfect. Occasionally there are obstacles in the way or a trench is to be dug along an embankment or slope. In all these cases, it is helpful to use a milling machine that is as flexible as possible and can adapt to these different conditions. The GM 140 AFH-500 excavator tiller does just that. It offers the greatest possible range of movement in use and can be adapted to diverse ground and working conditions.

Practical pictures trencher GM 140 AFH-500 at different applications

Video trencher GM 140 AFH-500

Data sheet trencher GM 140 AFH-500

Milling width: 70-450 mm
Milling depth: max. 1500 mm
Requirements carrier device: Hydraulic excavator from 15 T, oil v. 120-140 L/min, 250-300 bar
Travel drive:
Working/ Transport speed: Carrier device dependent
Milling chain drive: Hydraulic via radial piston motor
Electrical system:
Hydraulic system:
Special equipment: -carbon chisels -Mixing chain (chisel+knife) -sole scraper with sole plate, which adapts mechanically/automatically to the respective milling depth -3000 mm loading conveyor belt for direct loading -Laser system manual or automatic -Pipe laying shaft and holder for pipes
Standard equipment: Standard conveyor belt Slewing ring hydr.
Milling beam depth: 600,850,1200 and 1500 mm (laterally adjustable)
Chain width: 70,150,200,250,300,350,400 and 450 mm (75 mm Tgl.)
Weight: 1800 KG
Length: 3400 mm
Width: 1500 mm
Height: 1800 mm

You want more information?

Technical data for the GM 140 AFH-500 excavator tiller

The GM 140 AFH-500 excavator tiller works with a hydraulic drive. This is extremely powerful, so that even complex work can be done well and quickly. With a dead weight of just 1,800 kg, the tiller is pleasantly light and can therefore be used by various excavators.

However, the prerequisites for use are excavators from 15 tons, with 120-140 l/min and 250-300 bar. The assembly takes place by means of modern quick-change systems within the shortest time and with few handles. It is therefore easily possible to use the milling machine on different excavators for different purposes. In addition, this way it is worth using the tool even for short milling distances.

These specifications are the standard values for the GM 140 AFH-500 excavator tiller. These vary somewhat depending on which accessories and extensions are used in the work. In case of doubt, detailed advice will help in the selection process to find the best excavator-mounted trencher for your own purposes.

Flexibility is the hallmark of the GM 140 AFH-500 excavator tiller

Every now and then it happens that a trench has to be dug at an obstacle. In these cases, it is important that the milling machine can be used laterally offset from the excavator so that it can reach the desired locations at all. The GM 140 AFH-500 excavator tiller achieves this with a hydraulic slewing ring. This means that it is no problem to use the tiller even on hedges, walls or crash barriers. This flexibility is one reason why companies of all imaginable sizes use this device for their projects.

Also providing maximum flexibility are the cutter bars and chain of the GM 140 AFH-500 excavator-mounted trencher. Indeed, these are designed to be suitable for different depths. For example, the milling bar depth can be 600, 800, 1,200 or 1,500 millimeters, and the milling bars are laterally adjustable. In addition, chains with widths of 70, 150, 200, 250, 300, 350, 400 and 450 millimeters are available. Thus, the milling machine adapts perfectly to the task at hand. Last but not least, it is possible to request customization. With this, a milling machine is suitable specifically for a particular project and is tailored to the individual requirements of the user.

Various selection criteria for the GM 140 AFH-500 excavator tiller

Depending on the project and the task at hand, different chains are used on the GM 140 AFH-500 excavator tiller. Among other things, carbon chisel chains are available, but also mixed chains with chisel and knife are available. Likewise, many users opt for a sole scraper with sole plate that adjusts individually to the respective milling depth. Another very practical feature when working with the GM 140 AFH-500 excavator tiller is a manual or automatic laser system as well as a pipe laying shaft and various cable reel holders.

The conveyor belt of the GM 140 AFH-500 excavator tiller is also tried and tested. This can be attached to both sides of the milling machine and thus offers the greatest possible

Freedom of use. Such a conveyor deposits the excavated material during milling so that it does not land on the edge of the trench. At the same time, however, it is so close to the trench that it can easily be backfilled with it after the pipes or cables have been laid. Alternatively, a loading conveyor with 3,000 millimeters can be used to directly load and transport away the excavated material.

Advantages of the GM 140 AFH-500 excavator tiller

The GM 140 AFH-500 excavator trencher is a specialized machine designed for digging trenches and laying cables and pipes in various applications. Compared to an excavator, the GM 140 AFH-500 offers several advantages:

  • Efficiency: The GM 140 AFH-500 has been specially developed for digging trenches and laying cables and pipes, which means that it is very efficient for these applications. Compared to an excavator, it can dig trenches faster and with less disruption to the surrounding landscape.
  • Precision: GM 140 AFH-500 trencher can work very precisely and allows to dig trenches to the desired depth and width. In comparison, an excavator may not be as precise and can result in uneven trenches.
  • Protecting the landscape: Because the GM 140 AFH-500 is specially designed for digging trenches and laying cables and pipes, it is able to protect the surrounding landscape. In comparison, an excavator can potentially cause more serious damage and dig large holes in the ground.
  • Versatility: The GM 140 AFH-500 is capable of cutting and milling a variety of materials, including asphalt, concrete and even harder materials like granite. This makes it a versatile machine that can be used for various applications.
  • Safety: The GM 140 AFH-500 is a very safe machine designed to operate in confined spaces. In comparison, an excavator may be more difficult to maneuver and less safe due to its size and weight.

Overall, the GM 140 AFH-500 excavator trencher offers many advantages over an excavator and is an efficient, precise and safe solution for digging trenches and laying cables and pipes.