Trencher Fastfinder

If the device you need does not appear in the search results, please do not hesitate to call us +49 591 – 76 314

Milling machine rental GM 140 AF

Trencher rental – GM 140 AF trencher for tractors succeeds in laying drainage pipes

This trencher as a trencher rental for tractors and trencher rental cleanly and precisely digs the trenches, which are important for laying drainage pipes. In agriculture, but also in basement construction, drainage pipe laying plays a crucial role. Such pipes are there to drain surface water so that it does not interfere with the respective projects. In order for such pipes to reliably perform their service, it is important to install them properly and professionally. The use of a GM 140 AF is particularly suitable for this purpose.

Prepare the drainage pipe laying with the trencher GM 140 AF

A trencher for tractors is a helpful tool when laying pipes or cables. The trencher GM 140 AF is able to cut very precise and clean trenches, ideal for drainage pipes. Already during milling, the device prepares the backfill. In fact, the attachment trencher transports the excavated material directly to the side of the trench by means of two augers. Once the pipes have been laid, the trench can be effortlessly backfilled.

For such work, the GM 140 AF trencher stands out for its high flexibility. For example, it is possible to offset the milling beams laterally by up to 600 millimeters. The trencher is then still pulled by the tractor, but does not create the trench directly behind it. In this way it is possible to avoid obstacles and slopes during work and to achieve the most precise digging.

Various equipment features of the trencher GM 140 AF

Milling rental – Different tools and machines are needed for different projects. For example, while a milling beam depth of 600 millimeters is sufficient for some projects, a milling beam depth of 1,500 millimeters is required for other tasks. Exactly this spectrum covers a trencher for tractors. Depending on the objective, different digging trees are used in the work and a selection of 70-400 millimeter cutter blades is also available for drainage pipe laying.

The GM 140 AF trencher has a mechanical PTO drive that operates at 1,000 rpm. The tiller’s own weight is 1,300 kg. When selecting, make sure that the respective tractor must be able to move this weight. Also, it should be borne in mind that the weight of the trencher for tractors may vary, depending on what equipment elements are used.

In fact, on request, the milling machine can be equipped with a sole scraper with sole plate that automatically or mechanically adjusts to the milling depth. It is also possible to choose a model with an edge scraper. Some milling machines have a manual or automatic laser system, and still others bring a pipe laying chute and a fixture for pipes. These individual equipment features make it possible to adapt the trencher for tractors to personal wishes or requirements.

Finding the right GM 140 AF trencher for your project

There is a wide range of trenchers to choose from. The various models are similar to some extent, but each has a different focus and special features. While some models are trenchers for excavators, for example, the GM 140 AF trencher is a trencher for tractors. In addition, the individual variants each have a different dead weight or come up with a certain number of features and equipment variants.

Grabenmeister will be happy to assist you in selecting and purchasing the milling machines you need. Some models are specially designed for drainage pipe laying and perform particularly well in corresponding tasks. With our expertise and many years of experience, we will be happy to advise you. This makes it easy for you to find your way around our wide range of products and get the ideal trencher for tractors.

Individual equipment on request!

  • Prerequisite -carrying device: tractor, Unimog hydrostatic or supercreep gear transmission
  • Standard equipment: standard conveyor belt
  • Milling beam depth: -600, 850, 1250 and 1500 mm (laterally adjustable)
  • Chain widths: – 70, 150, 200, 250, 300, 350, 400 and 450 mm (75 mm pcs).
  • Carbon chisel chains
  • Mixing chains (chisels and knives)
  • Sole scraper with sole plate, which adjusts mechanically or automatically to the respective milling depth
  • Edge scraper
  • Loading conveyor 3000 mm for direct loading
  • Laser system manual or automatic
  • Pipe laying shaft and receptacle for pipes

  • Drive: mech. via PTO (1000 rpm)
  • Weight: 2.000 kg
  • Length: 4.000 mm
  • Width: 2.000 mm
  • Height: 1.800 mm

(Weight and dimensions depend on the respective equipment)

If you have any questions, please use our contact form. We will promptly address your concern and contact you. You can also call us at +49 (0) 591 – 76 314. We are looking forward to your visit!

Milling machine rental
Milling machine rental